Pig feeding tower

1. Alleviated the problems of difficult recruitment and high employment costs in aquaculture farms;

2. Quantitative feeding to avoid inconsistent feed intake and unbalanced nutrition;

Reduce waste and improve breeding efficiency;

4. Beautify the breeding farm and maintain it for a long time;

5. Facilitate the daily management of the farm;

6. The closed feeding design can effectively reduce the pollution of rats and mosquitoes to the feed;

7. It is beneficial to the health of aquaculture, reduces feed waste, and reduces aquaculture costs.

What are the maintenance and precautions for the galvanized tower?

1. When transporting and installing the galvanized tower, care should be taken to protect it from damaging the tower body and components.

When the galvanized tower leaves the factory, it shall be packaged and transported in sections according to the specific situation, and personnel shall be sent to the site for commissioning and installation.

The galvanized tower is to be installed outdoors.

After more than ten years of development, the breeding feed tower has developed from a simple storage function to a new type of tower with better functions, low cost, and convenient operation. Such a feeding tower is a good equipment for animal husbandry, which solves the urgent needs of farmers.

The tower is mainly used for storing feed. Classified by material, the capacity of the main galvanized tower is usually designed to store feed for 2 to 3 days. If the time is too short, it will increase the feeding workload. If the time is too long, the feed will not be fresh enough. The volume of commonly used towers is 3.5 tons, 5.5 tons, or 7.5 to 10 tons. Because towers are typically installed in outdoor environments, they need to be weather resistant, corrosion resistant, and airtight. At the same time, they need to have good thermal insulation properties to avoid affecting feed quality.

The use of feed towers can meet the needs of raising more pig herds, reduce feed waste, save manpower, and save cost even in low market conditions.

1. The feeding tower can cooperate with feeding equipment to achieve precise feeding, save labor, improve production efficiency, and greatly reduce breeding costs.

2. The combination of feeding tower and automatic feeding line can improve the pregnancy turnover rate of sows and reduce the culling rate.

3. The use of the entire automated feeding line, combined with the use of quantitative buckets, can shorten feeding time, quiet the feeding process, and alleviate the stress response of sows.

4. The use of feed towers in conjunction with automatic pig farming equipment can effectively reduce personnel turnover, reduce feed waste and pollution, and promote biosafety prevention and control.

5. Saving labor input also increases worker retention rate.

The use of the material tower will be combined with the material line host, quantitative bucket, stainless steel corner, material line pipe, stopper chain, etc. to form an automated feeding system. The specifications of the feeding tower range from a few tons to dozens of tons, suitable for large pig farms. The feeding tower is mostly made of galvanized sheet material, which can be well heat-resistant and corrosion-resistant.1. Alleviate the problems of difficult recruitment and high labor costs on farms. 2. Quantitative feeding to avoid inconsistencies, imbalanced nutrition, and poor growth before and after artificial feeding. 3. Reduce waste and improve breeding performance. 4. Beautify the breeding farm for a long time. 5. Medication can be added to facilitate reproduction during normal and stressful periods. 6. Facilitate daily farm management. 7. The closed feeding design can effectively reduce the pollution of feed and food theft by mice and flies. 8. It is beneficial for healthy breeding, reduces feed waste, and reduces breeding costs.