Stainless steel pig feed tanks can achieve automatic feeding, and have been increasingly used in pig farms in the past two years. Many farmers struggle with the specifications, dimensions, installation, and use of stainless steel pig feed tanks when purchasing them. Rust steel pig feeding trough can be divided into two specifications based on the size of the pig: conservation feeding trough and fertilizer feeding trough. According to the installation method of the pig farm, it can be divided into two types: single side and double side. The single side can be directly fixed to the wall for use, and the double side feeding trough can be placed between two pig pens for use by both houses, which is economical and convenient. For the installation of the material trough, it can be directly fixed on the wall with expansion screws, and the fence can be fixed using cross pipe clamps, or it can be directly fixed on the ground with cement grinding.
Wet and dry feeder
1、 One feeder can feed 3540 finishing pigs.
2、 The wet mix design increases the feed intake of pigs by more than 20 days and is released more than 7 days in advance.
3、 Super large capacity design, can add 100 kilograms of feed at a time.
4、 Enlarge and deepen the design of the large chassis, more not waste feed, 304 stainless steel material, more thorough cleaning and disinfection.
5、 The bracket is hot-dip galvanized, which can prevent rust for 25 years.
6、 The bucket is made of new raw materials by injection molding, which is acid and alkali resistant, corrosion resistant, and has a long service life.
7、 The cover design effectively prevents mice from stealing and flies from polluting the feed, making it suitable for automatic feeding or manual feeding.
8、 Better effect with automatic feeding line.
The main body of the drinking bowl is made of 0.8mm 304 stainless steel, which is sturdy and easy to use, with an overall life of over 10 years. The thickened design prevents pigs from biting the bowl during use;
The use of stainless steel material tanks in conjunction with automated material line equipment can reduce the labor intensity of breeding personnel. The device for controlling the feeding of stainless steel material tanks can be set according to the feeding situation of the pig herd.
Many large-scale pig farms will install stainless steel feed tanks because the stainless steel material has a smooth surface, does not harm pigs, is corrosion-resistant, has a long service life, is easy to clean, and is highly recognized by breeding personnel.
1. Stainless steel material tank cleaning is more convenient
Taking fattening pigs as an example, the fattening stage takes about 5 months. During this time, the pig herd will collect food and the inside and outside of the feed trough will be covered with accumulated substances. After the pig herd is released, the breeding personnel need to thoroughly clean the pigsty, including the inside and outside of the feed trough, and use a high-pressure water gun for strong cleaning. There will be drainage holes at the bottom of the feed trough to timely discharge wastewater.
2. Disinfection
After cleaning, it is time to disinfect. This can effectively inhibit the growth of bacteria on the material tank, and leave the tank empty for a few days after disinfection is completed.
The pigsty feed trough is only a small factor that promotes the efficiency of the pig farm, and it is necessary to pay attention to the impact of the overall environment of the pigsty to provide a good growth environment for the pig herd.
