Stainless steel feed tank for pigs

1. Save feed and reduce costs

2. Food hygiene reduces the risk of disease

3. Short breeding cycle and early marketing

Automatic feed supply saves manpower

Product characteristics;

1-piece 201 stainless steel with high strength, corrosion resistance and non water absorption

2. Feeding partition design prevents pigs from scratching their ears while eating, and saves feed

No dead corner design No storage or blind feeding The feed in the trough can be eaten by pigs, which is clean and convenient without wasting feed.

4 10 grid adjustable discharge uniform operation Easy to adjust the discharge amount at will

5. Automatic feeding, eating, and leaking to prevent excessive storage of feed, saving feed, health, and hygiene

Chute Advantages

1. High strength and corrosion resistance;

2. Non absorbent, non absorbent;

3. Convenient cleaning, no waste of feed;

4. The feed regulating device is reasonably designed and easy to operate, with uniform discharge at both ends, and adjustable height can be arbitrarily selected;

5. The surface of the stainless steel pig feed tank is smooth and not easy to store;

6. The stainless steel pig feed trough is double-sided, and each side is fed with 3-7 holes.

7. Different sizes and specifications can be customized according to requirements

Detailed introduction to the material trough

The equipment is all made of stainless steel and is sturdy. Pollution reduction.

2. The external dimensions can be customized, and the material barrel is made of good raw packaging materials.

3. There is an automatic feed stop function. When there is surplus feed in the feed chute, the sensing head will sense a signal, and the feed will not be discharged during the feeding period for a long time.

4. Intelligent trough and Congee feeder are controlled by microcomputer, and induction feeding is adopted to realize unattended automatic feeding** The control components are modular, fully sealed with sealant, waterproof and dustproof, durable, and easy to replace.

5. Intelligent wet mix feeding to improve feed utilization efficiency. Mix water and feed together in a tray until the remaining feed is consumed by the piglets, preventing excessive material in the feed tank from causing waste. The feeding tray is integrally pressed with 201 stainless steel, and the water material ratio can be adjusted to meet the needs of pigs at different stages. Feeding piglets with wet mix can greatly improve the absorption and conversion efficiency of feed.

6. Reduce the occurrence of respiratory tract problems. Eating wet mixes for piglets can greatly reduce the possibility of feed powder being inhaled into the body, thereby eliminating the occurrence of respiratory tract problems caused by feed powder inhalation.

Advantages of material trough:

1. All made of stainless steel material (can be tested with a magnet)

2. Convenient installation and disassembly (with a rear hook that can be fixed on the delivery bed for easy feeding and feeding of piglets)

3. Piglet feeding trough, suitable for feeding piglets during the production period

4. Picking food in columns to prevent piglets from snatching it up, multi-purpose * (stainless steel material, corrosion-resistant, weather resistant, and bite resistant)

5. The hook adopts a spring type and can be firmly fixed

Advantages of using stainless steel double-sided feed tanks for pigs: What are the advantages of using feed tanks for pig farming

1. High strength and corrosion resistance; Non absorbent and non absorbent;

2. The stainless steel pig double-sided feed trough is easy to clean and does not waste feed;

3. The feed adjustment device is designed reasonably, easy to operate, with uniform discharge at both ends, and adjustable height can be freely selected;

4. Stainless steel pig uses double-sided material groove edge storage technology. The stainless steel pig feed trough is double-sided, with each side divided into 5 large compartments for feeding. The stainless steel pig double-sided material trough can be optionally equipped with both wet and dry functions.

The stainless steel feed trough is an automatic feed equipment suitable for feeding dry powder and granular materials. The inner surface of the groove is smooth and not easy to store materials. The feed adjustment device is designed reasonably and easy to operate, with even discharge at both ends, and the width of the feeding port can be adjusted arbitrarily. Stainless steel material trough * * is corrosion-resistant, non absorbent, * * chemical, easy to clean, and does not waste feed. Complete size specifications.