Characteristics, performance and control methods of aquaculture heater
The aquaculture heater is an environmentally friendly, energy-saving, balanced operation, and stable characteristics of the aquaculture heater. Aquaculture heaters are widely used in agriculture, animal husbandry, and industrial production. The breeding heater uses relatively new raw materials and indoor space transportation technology, featuring high water absorption, corrosion resistance, large volatile total area, and high cooling speed.
The aquaculture heater has surface activity and natural water absorption capacity. Aquaculture heaters do not contain compounds such as formic acid that can easily cause skin allergies. During installation and application, it is suitable for benign, environmental protection, energy conservation, ecological environmental protection, and economic development. The specifications of the breeding heater can be freely produced and manufactured.
The following editor will introduce the ventilation control method of the aquaculture heater:
1. Partial exhaust pipe natural ventilation
Natural ventilation control measures for aquaculture heaters are applicable to aquaculture heaters with concentrated emission of pollutants; The discharge situation is low aerodynamic, or the pollutants are chemical substances such as smoke and dust, annoyance, etc., which must be collected at a cyclone rate of 8 meters per minute. To select such control measures, it is necessary to maintain a low negative pressure and cultivate a warm air heater for rapid ventilation.
2. Natural ventilation of diluent
The natural ventilation of the dilution solution of the aquaculture heater requires several aquaculture heaters to continuously absorb clean gas from the outside, continuously dispersing the stains in the processing plant, and preventing the evaporation and accumulation of air pollution sources during the production process from achieving a risk rate or benign degree. Therefore, the adjustment method for natural ventilation of diluent is suitable for the dispersion of multiple air pollution sources rather than the concentration at multiple starting points, and is also suitable when some of the dispersion has subsided into the gas of the processing plant.
Aquaculture heaters are more dispersed in the factory rather than concentrated in multiple starting points. A better exhaust control is to closely combine part of the exhaust system with natural ventilation of the diluent, which not only has the advantages of both, but is also more effective in good governance. Because aquaculture heaters are used in many workplaces, it is likely that not only environmental pollution will be discharged, but also some environmental pollution will be discharged.
Heater 2
The aquaculture heater can partially naturally ventilate, greatly reducing the amount of exhaust air required for natural ventilation of the diluent, and greatly saving the cost of machinery, equipment, and labor. Low noise, strong air volume, high efficiency, reliable performance, and easy installation. Welcome new
Characteristics of breeding hot air fan:
1. Fast heating, small temperature difference: Adopting negative pressure ventilation mode, forced heat dissipation, fast heating speed, and small temperature difference.
2. Temperature can be set and controlled: chickens and pigs require different temperatures during different periods, and the breeding hot air fan can achieve arbitrary temperature adjustment. When the temperature is lower than the set temperature, it can automatically blow fire and heat up; Automatically shut down and seal the fire above the set temperature.
3. Ventilation and ventilation: It mainly uses bellows to supply hot air and hot oxygen air inside the breeding house, updating the air inside the breeding house.
4. Sterilization and disinfection: This boiler can instantly kill bacteria and viruses in the air while heating, purifying the air, ensuring hygiene and safety. At the same time, using air conditioning filtration technology can effectively block over 80% of impurities in the breeding area.
5. Safe and reliable, labor-saving: Generally, boilers are dusty and have gas. This boiler provides clean and hygienic oxygen, which is very safe for livestock and people and does not cause carbon monoxide poisoning. Fully automated operation is basically achieved, saving labor.
There are generally three types of breeding hot air fans: electric hot air fans, intermediate combustion hot air fans, and direct combustion hot air fans. According to the different forms of radiators, they can be divided into water tank type, fin type, and winding type hot air fans.
and old customers to inspect and purchase.