The hot air blower is the product of choice for the upgrading of modern industrial heat sources, and the electromechanical equipment is a better configuration of hot air sources for automation machines such as hot air conveying furnaces, drying ovens, ovens, and packaging machines. The hot air blower consists of a blower, a heater, and a control circuit. It realizes the control of working temperature and air volume. In addition, the hot air fan is also equipped with an overtemperature protection circuit for the fan air inlet and motor, and an emergency brake switch for the main circuit, further improving the protection of the equipment.
Scope of application of air heater: mainly suitable for heating and heating industries such as brooding, breeding, flowers, workshops, office, drying, civil engineering antifreeze, etc.
Heater parameters:
Model: DCDN-5/(remote control version)
Heating power: 5KW
Fan power: 90W
Air volume (cubic meter): 1200 cubic meters
Air outlet temperature: 80 degrees
Heating below 25 degrees (square meter): 80 square meters
Heating under 35 degrees Celsius (square meter): 50 square meters
Self weight: What are the advantages of using electric heaters and stoves in a 15KG aquaculture farm
Overall dimension: 380 * 380 * 600mm
Usage of air heater: The electric air heater adopts a fully automatic intelligent temperature control system, which requires no installation and is ready for use when powered on.
Application of heating equipment: Compared to most other heating products, the oil-fired heater series also has extremely convenient mobility under the condition of having high power and heat production. They are unique to other products. They come with large capacity fuel tanks, which can be used continuously for a long time, and can easily address various problems caused by production in various industries, especially applicable to the construction industry, aquaculture, agriculture, industry, and other industries.
Excellent performance: 20-50KW heat output, air outlet temperature above 300 ℃, only 220V power supply, large size wheel hub, large capacity fuel tank, fully automatic operation, and strong mobility. This is a fuel industry hot air fan product that we are proud of, and it can meet any needs of you.
A heater is a combined unit composed of a ventilator, an electric motor, and a radiator. Suitable for various types of workshops where air circulation is allowed, it can be used for circulating air heating when the air does not contain dust or flammable gases. The heater is mainly composed of an air heater and a fan. The air heater dissipates heat, and then the fan sends it out to regulate the indoor air temperature. The air heater consists of spiral finned tubes.
For example, the heat dissipation pipe of a steam type heater is wrapped around a wall thickness of Φ On the 21.5 seamless boiler tube, the sheet spacing is 2.5mm, and the exhaust pipe and heat medium flow pipeline are of an integral welded structure. The working pressure of the heater is below 0.8MPa.
1. Rapid heating up
The heating pipe material of the electric heater is 304 stainless steel, which is not easy to burn out, increases the heat dissipation area, improves the heat conversion rate, and heats up faster, making it very suitable for industrial use.
2. High comfort level
Electric heaters directly use infrared radiation for heating, which is the most comfortable way to prevent the loss of a large amount of moisture in the air and prevent it from becoming too dry.
3. Low usage cost
As long as electric heating fans use electricity as a combustion energy source, the cost of use is greatly reduced.
4. High level of safety
Electric heaters generally have a relatively high level of safety protection, including anti tipping protection, shutdown protection, overheating protection, and overload protection. Four fold protection allows you to use with peace of mind.
